Chermside 4032
Roofing in Chermside
Chermside and the northside suburbs around it have a lot of 1960s to 1980s brick and tile homes, many still on their original concrete tile roofs. By now the ridge pointing is cracking, tiles have been broken by storms and foot traffic, and the coating has worn off. One QBCC-licensed, insured local roofer quotes roof repairs, ridge capping, restorations and roof replacement across Chermside, Kedron, Aspley and Stafford.
Updated November 2026
Chermside prices
- Colorbond re-roof, per m²$80–$180 per m²
- Roof leak repair (minor, per job)$250–$800
- Roof inspection and report$200–$500
- Tile roof restoration, whole roof$4,000–$11,000
Published Brisbane price ranges (GST incl.), not a quote. Your price is confirmed in writing before work starts.
Recent roofing work



Photos from past roofing jobs, not necessarily by the roofer you are matched with. Ask your roofer for photos of their own recent work.
What fails first on a northside tile roof?
The ridge and hip pointing. Mortar under the caps breaks down over decades, the pointing cracks, and storm rain gets in at the top of the roof. Then come cracked tiles, often from old hail or from someone walking on the roof to fix an antenna or solar panels.
A full rebed and repoint has published Brisbane figures of $800 to $3,500, about $2,200 typical.
Restore or replace?
If the tiles are mostly sound, a restoration (clean, repair, rebed and repoint, recoat) is usually the cheapest way to get another 10 to 15 years. If the battens are failing or lots of tiles are broken, a tile-to-metal roof replacement takes weight off the house and ends the pointing maintenance.
Solar panels on the roof
Plenty of northside homes have solar. Re-roofing or restoring under panels means taking them off and putting them back, which should be done by a licensed electrician. Make sure the quote says who is doing it and what it costs.
How much does roofing work cost in Chermside?
| Job | Typical Brisbane price |
|---|---|
| Colorbond re-roof, per m² | $80–$180 per m² |
| Full roof replacement, single-storey home | $14,000–$30,000 |
| Full roof replacement, two-storey home | $15,000–$40,000 |
| Roof leak repair (minor, per job) | $250–$800 |
| Broken tile replacement (per job) | $300–$1,000 |
| Roof inspection and report | $200–$500 |
| Ridge capping rebed and repoint, whole roof | $800–$3,500 |
| Tile roof restoration, whole roof | $4,000–$11,000 |
| Roof painting, single-storey | $2,500–$6,000 |
| Gutter replacement, per metre | $40–$110 per m |
See the full Brisbane roofing cost guide for sources and what changes the price.
The standard we ask of every roofer we refer you to
The roofer does the work, not us. Ask for each of these in your written quote and contract.
- A roofer with a QBCC licence for the work and public liability insurance (certificate on request)
- A written quote that lists what will be done, the materials and the price
- A written contract and QBCC Home Warranty cover for residential jobs over $3,300, as Queensland law requires
- Photos of the problem before work starts, and of the finished work
- Roof sheets fixed and tied down to suit Brisbane's storm winds
- Site left clean: old tiles, sheets and screws taken away, gutters cleared of debris
- A walk-through of the finished job before final payment
Before and after photos, and a written scope
You get photos of what was wrong and what was done, and a written scope before anything starts, so you know exactly what you are paying for.
Licensed, insured roofer, public liability certificate on request
Services in Chermside
Chermside roofing questions
In Queensland, building work over $3,300 needs a QBCC licence, and residential jobs over that amount need QBCC Home Warranty cover. Check a roofer's licence (QBCC).