Roof Replacement and Re-Roofing in Brisbane
A roof replacement swaps the whole roof covering, usually for Colorbond steel, either over an old metal roof or as a tile-to-metal change. Published Brisbane figures put a Colorbond re-roof at $80 to $180 per m² (about $120 typical), or $14,000 to $30,000 for a single-storey home (about $22,000 typical). One QBCC-licensed local roofer will measure and quote.
Updated November 2026
Roof Replacement prices
- Colorbond re-roof$80–$180 per m² (about $120 typical)
- Re-roof of a tile roof, incl. strip-off$100–$220 per m² (about $150 typical)
- Full roof replacement, single-storey home$14,000–$30,000 (about $22,000 typical)
Published Brisbane price ranges, not a quote. Your price is confirmed in writing before any work starts.
Get my free quoteSigns it is time for roof replacement
- Rust through the sheets, not just on the surface
- Leaks in several places on a metal roof
- Tile roof with failing battens or lots of broken tiles
- Original corrugated iron on an older Queenslander
- You are renovating, raising or extending the house
When is it time to replace a Brisbane roof?
When repairs stop being good value. Rust through the sheets rather than on the surface, leaks in several places, or a tile roof with failing battens and lots of cracked tiles all point to a new roof. Brisbane's older Queenslanders and post-war homes often still have their original corrugated iron, which has usually reached the end of its life.
A good roofer will tell you honestly whether a restoration would buy you more years for less money.
Tile to metal in Brisbane
Replacing tiles with Colorbond takes a lot of weight off the house and ends ridge pointing maintenance. It needs to be done properly: when the Cyclone Testing Station investigated the November 2014 Brisbane storm, it found that some roofs that failed had been changed from tile to metal without upgrading the batten and rafter tie-downs. Ask the roofer how the new roof will be tied down.
Published Brisbane figures for re-roofing a tile roof with the tiles stripped off are $100 to $220 per m² (about $150 typical).
What a proper re-roof includes
Removal of the old roof, new battens where needed, sarking or an insulation blanket, new sheeting, ridge, hip and barge flashings, new gutters and downpipes if they are part of the job, and safety rails while work is done. Get each item listed in the quote.
Licences, contracts and Home Warranty
In Queensland, the contractor must hold a QBCC licence for building work over $3,300 and take out Home Warranty cover on your behalf for residential work over $3,300. Jobs over $20,000 need a Level 2 regulated contract, and deposits are capped by law. Bayside homes close to the water should also ask about coastal-rated Colorbond.
How much does roof replacement cost in Brisbane?
| Job | Typical Brisbane price |
|---|---|
| Colorbond re-roof | $80–$180 per m² (about $120 typical) |
| Re-roof of a tile roof, incl. strip-off | $100–$220 per m² (about $150 typical) |
| Full roof replacement, single-storey home | $14,000–$30,000 (about $22,000 typical) |
| Full roof replacement, two-storey home | $15,000–$40,000 (about $25,000 typical) |
Published Brisbane price ranges (GST incl.) from whatsthedamage.com.au (verified November 2026), not our quote. Roof size, pitch, storeys, access and what is actually wrong decide your price, and it is confirmed in writing before work starts. See every job in the Brisbane roofing cost guide.
The standard we ask of every roofer we refer you to
The roofer does the work, not us. Ask for each of these in your written quote and contract.
- A roofer with a QBCC licence for the work and public liability insurance (certificate on request)
- A written quote that lists what will be done, the materials and the price
- A written contract and QBCC Home Warranty cover for residential jobs over $3,300, as Queensland law requires
- Photos of the problem before work starts, and of the finished work
- Roof sheets fixed and tied down to suit Brisbane's storm winds
- Site left clean: old tiles, sheets and screws taken away, gutters cleared of debris
- A walk-through of the finished job before final payment
Before and after photos, and a written scope
You get photos of what was wrong and what was done, and a written scope before anything starts, so you know exactly what you are paying for.
Licensed, insured roofer, public liability certificate on request
Recent roofing work



Photos from past roofing jobs, not necessarily by the roofer you are matched with. Ask your roofer for photos of their own recent work.
A roof job done properly, by a licensed roofer
A cheap roof job that only patches the stain usually means paying twice. That's why every job we pass on goes to a licensed, insured Brisbane roofer who agrees to this standard before they get the work.
QBCC licensed
In Queensland, building work valued over $3,300 needs a QBCC licence, and the contractor must take out Home Warranty cover on residential jobs over that amount. Jobs only go to roofers who hold the right licence and insurance.
The cause, not just the drip
Most leaks show up metres away from where the water gets in. The roofer finds the entry point (flashing, ridge, cracked tile, rusted screw) and fixes that, not just the stain.
Built for storm season
Brisbane's spring and summer storms bring hail and strong wind gusts. New roofs should be fixed and tied down properly, not just laid over the old frame.
Safe on the roof
Roof work is high-risk work under Queensland's work health and safety rules. Roofers use edge protection or harnesses, not a ladder and good luck.
A written price first
You get the scope and price in writing before work starts, and any change should be agreed in writing.
Photos of everything
Before and after photos of the problem and the repair, so you can see what you paid for without climbing up.
Left clean
Old tiles, sheets, screws and offcuts taken away, and gutters cleared of anything that came off the roof.
Real roof repair photos



